I-Connect007 Launches Fundamentals of RF/Microwave PCBs Micro eBook


Reading time ( words)

I-Connect007 is excited to announce the release of the latest title in our micro eBook design series: The Printed Circuit Designer’s Guide to… Fundamentals of RF/Microwave PCBs

The Printed Circuit Designer’s Guide to is an ongoing series of micro eBooks dedicated to educating PCB designers. This book series serves as a valuable resource for the most relevant design information available.  

Written by John Bushie, director of technology at American Standard Circuits, and Anaya Vardya, president and CEO of ASC, this micro eBook provides information needed to understand the unique challenges of RF/microwave PCBs.  

The authors answer two main questions: what is the correct material to use for a particular project, and what can be done at the design stage to make a product more manufacturable? 

"In my 39 years in this business, this is the first and only book published that addresses the critical aspects of this manufacturing technology. It is easy to read and packed with great information,” says Mike Carano, vice president of technology and business development at RBP Chemical Technology 

Readers, especially RF PCB designers, will gain a better understanding of issues related to the design and manufacture of RF/microwave devices from a PCB fabricator perspective.

Download this free eBook today at i-007ebooks.com/RF! You can also view our full library at i-007ebooks.com, including ASC’s previously published book, The Printed Circuit Designer’s Guide to Flex and Rigid-Flex Fundamentals.   

Look for these other exciting titles in The Printed Circuit Designer’s Guide… eBook series:

  • Signal Integrity by Example and Power Integrity by Example by Mentor, A Siemens Business
  • Secrets of High-Speed PCBs — Parts 1 & 2 by Polar Instruments
  • Design for Manufacturing (DFM) by Altium 

…and these upcoming releases:

  • Thermal Management with Insulated Metal Substrates by Ventec International Group 
  • Documentation by DownStream Technologies
  • Executing Complex PCBs by Freedom CAD 

We hope you enjoy The Printed Circuit Designer’s Guide to… Fundamentals of RF/Microwave PCBs

For more information, contact:

Barb Hockaday
I-Connect007 eBooks
barb@iconnect007.com 
+1-916-365-1727 (Pacific)

Share

Print


Suggested Items

EMA: Cadence Moves Simulation Further Up in the Design Cycle

03/15/2019 | Andy Shaughnessy, Design007 Magazine
Cadence Design Systems recently integrated more of its Sigrity capabilities into the front end of its PCB design tools. During DesignCon, Chris Banton of EMA Design Automation spoke with me about how this drive for “model-less analysis” benefits the PCB designer who can now access signal and power integrity, DFM, and electrical rule checking functionality early in the design process and have fewer issues later.

Words of Advice: What are Your Biggest Design Challenges?

03/11/2019 | Andy Shaughnessy, Design007 Magazine
In a recent survey, we asked the following question: What are your biggest design challenges? Here are just a few of the answers, edited slightly for clarity.

Todd Westerhoff Discusses His New Position and Much More

03/07/2019 | Andy Shaughnessy, Design007 Magazine
At DesignCon, I met with our old friend Todd Westerhoff, a veteran signal integrity engineer. Todd joined Mentor, a Siemens Business, since we last spoke. We discussed his new job responsibilities, his drive to get more designers and engineers to use SI tools, and the increasing value of cost-reduced design techniques versus overdesigning PCBs.



Copyright © 2019 I-Connect007. All rights reserved.