The PCB Design Magazine is Renamed Design007 Magazine; January 2018 Edition Now Available


Reading time ( words)

The January 2018 issue of Design007 Magazine  has published and is now available for download.

To ring in the new year, we’ve made a few changes to our magazines. You may have noticed that our name has changed from The PCB Design Magazine to Design007 Magazine. Not only did we update our magazine’s name, but we also refreshed the interior pages of the publication. As an I-Connect007 publication, Design007 Magazine fits nicely with our other publications, which also carry through with the naming convention starting this month: SMT007 Magazine and PCB007 Magazine. We hope you enjoy the fresh new look.

Check it all out this month in Design007 Magazine, now on the virtual newsstand and available for delivery in your e-mailbox each month by subscribing here.

You can also download the pdf version here for future reference.

Share

Print


Suggested Items

TTM’s Approach to Stackup Design: Train the Customer

01/12/2021 | I-Connect007 Editorial Team
In this interview with the I-Connect007 Editorial Team, TTM’s Julie Ellis and Richard Dang drill down into stackup design, detailing some of the common stackup challenges that their customers face when designing for both prototype and volume levels, and offering advice to designers or engineers who are struggling with stackup issues. They also discuss why having too many different prepregs in a stackup can be asking for trouble, and how proper stackup design can optimize both the fabrication and assembly processes.

Lee Ritchey Discusses His ‘Homemade’ NASA Board

11/26/2020 | I-Connect007 Editorial Team
In this audio interview, Lee Ritchey shares a story about his favorite PCB design—a board that he built on his kitchen table early in his career for a radio used on the Apollo 11 spacecraft. Lee explains how he ended up working on this design as a young engineer, as well as the excitement that he felt watching Apollo 11 land on the moon while carrying his PCB. He also jokes about why his wife was less than pleased with his handiwork when he drilled holes in the board on the kitchen table.

Real Time with… AltiumLive 2020: The Need for Simulation in High-Speed PCB Design

10/06/2020 | I-Connect007 Editorial Team
Andy Shaughnessy and Picotest Managing Director Steven Sandler discuss the panel that Steven will be participating in at AltiumLive 2020. The panel, led by Dr. Eric Bogatin, will feature co-panelists Heidi Barnes of Keysight Technologies, Rula Bakleh of Graphcore, and Istvan Novak of Samtec, who will discuss various ways to reduce signal and power integrity issues by using simulation, measurement, and other tricks of the trade. Steven also discusses his presentation on simulation, which focuses on SPICE simulation methods.



Copyright © 2021 I-Connect007. All rights reserved.