-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
In Terms of Experience, a 10,000-foot View of China
January 17, 2018 | Barry Matties, I-Connect007Estimated reading time: 21 minutes
In the past 30+ years of PCB manufacturing in China, you would be hard-pressed to find someone more connected to the pulse of the Asian market than Gene Weiner. Barry Matties met with the industry veteran at HKPCA to get his take on the show, the current and future market conditions of China, and any effect the new U.S. administration might have on trade relations going forward.
Gene Weiner at the opening ceremony of HKPCA 2017 in Shenzhen
Barry Matties: Gene, what are your initial thoughts on HKPCA 2017?
Gene Weiner: It is a great exhibition! A little while ago, walking down the aisles, I thought I was in the subway at Tokyo during rush hour. I've never seen crowds like this at prior HKPCA events. It's the biggest PCB crowd since the old NEPCON days in the ‘60s at the Coliseum in New York. The attendees are asking good questions. Many are here to buy; some are even buying equipment they didn't originally intend to buy during the show. There were many kinds of new products for sale ranging from remote verification at Orbotech to affordable 3D printing at WKK; it's just astounding.
Matties: There are a lot of people here that I did not expect to see either, as well as a lot of first-timers.
Weiner: That's true. The first-timers include a vice president of Nan Ya, James Ho, which surprised me. He had never come to this show. He always supported the TPCA, Taiwan's printed circuit show, and then the show over in Suzhou. He appeared to be thoroughly amazed at what he saw here.
Matties: There are a lot of shows, but there are very few shows in the world that have as much equipment as this, where you can really come in, kick the tires and see some options.
Weiner: Well, all of the show’s available space was totally sold out. As I understand it, there are more than 540 companies in three halls. I'm surprised at a number of things. Not only is the Chinese-built equipment more advanced, but the quality of manufacture of printed circuit equipment, ranging from cut sheet laminators down to drilling machines, is much improved over a few years ago. It is now on a global quality level. The other thing that shouldn't have surprised me is that, in the specialty chemicals, the copycats are now going after the direct metallization for the modified semi-additive processes including carbon or graphite as well as the organic metallization processes to make holes conductive and metallize other non-conductive surfaces. The number of companies offering these apparent “knock-offs” surprised me as did the size of their booths.
Aisles are filled at HKPCA
Matties: And the copycat is still an issue, and it's an issue that's just hard to reconcile, because they may shut down one brand and start the next day with another.
Weiner: Well, the answer is still to get somebody, a trusted partner, and arrange for local manufacture, assembly or subassembly whenever possible, which is difficult to do. You have to build relationships like anywhere else. It's a fast-moving industry. It's changing. We're going to see another change due to increases in wafer level packaging. This has already affected the BGA industry very negatively, and there are other new packages coming. But here, everything seems to be turning to automotive electronics. China plans to become the world’s leader in the production and use of autonomous driving and electric vehicles. China has reserved about one third of the booth space at the upcoming CES show in Las Vegas. The city of Shenzhen, where we are, has already completed electrifying all of its public transit with more than 16,000 electric buses.
Matties: Interesting that you bring that up. I was interviewing Phil Carmichael, president of IPC China/Asia. He was mentioning electric vehicles. In China, he explained that license plates are very expensive. Sometimes it's half the cost of the car, I guess. Depending on the car it could be $10,000, $15,000 just to get a license. But the EV, there's no fee for the license, and it's creating a demand.
Weiner: Yes, it's creating a demand. The government here wants all the cars to be electric by 2025, to the point of which Ford Motors is going to introduce a bunch of hybrid and electric models. They announced it just this past week while we were here. The Chinese government is also clamping down on truck companies to focus on the qualified ones that will build quality vehicles that are efficient. Now, it is interesting to note, just before I boarded my plane in Boston, I saw a newsflash that Tesla is setting up a factory here, and what is even more interesting is that they're talking about autonomous driving trucks, tractor-trailers, like an 18-wheeler that can carry a full load for 600 miles and still be autonomous driving.
I envision pictures of a caravan of these without a driver making major deliveries across most of the country. I'd like to see it in the States instead of some of the Mexican trucks that don't meet our safety standards coming across our Southern border. The autonomous driving trucks could be a lot safer and better, but there's a huge, huge challenge for the printed circuitry. The specifications and standards are still being written as they're going forward, and at the same time, we're switching from 6 and 12 volts to 24 volts and 36 volts. Some are using old components that are not yet tested to the new performance demand levels. They have to check the reliability in extremely high humidity conditions. There will unbelievably high temperature rises on cars that will challenge the circuit substrates sensors.
How do you test for that? Bosch told me that they will run a test cycle of 10 seconds between sub-zero and 175°C in the future. There is nobody equipped yet to test to that level or to even set up those tests. That's going to be an interesting during the next few years as these systems get on the road. If we look less than 10 years down the road, 50% of the value of a car is going to be in electronics. And we're going to see more open housings, and more plastic housings instead of metal. We're going to reduce weight. We have to dissipate heat. We have to get airflow. We're going to see more heat on the switching because these are always on, whether they're charging or running, it's an always-on condition, so there's always heat generation. We will see increases in highly automated driving in many vehicles before we see fully automated cars.
Everything is changing. I'm going to be visiting Ventec shortly, and they have developed, which I saw in Germany at productronica, a laminate that dissipates heat that's copper on one side for the circuitry, aluminum on the other. There were three circuits in a headlamp assembly with the aluminum side bonded to a heat sink. The part was designed to be dropped into a Mercedes C200.
Page 1 of 3
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.