Ucamco Upgrades Gerber Format Specification Manual


Reading time ( words)

Ucamco has released version 2017.11 of the Gerber format specification and version 2017.10 of the proposal to include fabrication documentation in the Gerber format. Both documents are available on Ucamco’s downloads page. To view these documents, click here.

About Ucamco

Ucamco (formerly Barco ETS) is a market leader in PCB CAM software, photoplotting and direct imaging systems, with a global network of sales and support centers. Headquartered in Ghent, Belgium, Ucamco has over 25 years of ongoing experience in developing and supporting leading-edge photoplotters and front-end tooling solutions for the global PCB industry. Key to this success is the company's uncompromising pursuit of engineering excellence in all its products. Ucamco also owns the IP rights on the Gerber File Format through its acquisition of Gerber Systems Corp. (1998).

Share




Suggested Items

Cadence System Design Solutions Guide Available Now

04/14/2022 | I-Connect007 Editorial Team
You already have the I-Connect007 book "The System Designer's Guide to... System Analysis", written by Brad Griffin of Cadence Design Systems. Now, download the bonus companion guide, "The Cadence System Design Solutions Guide" for solutions to all your complex system analysis needs. Put Cadence’s expert knowledge into action!

Book Excerpt: 'The Printed Circuit Designer’s Guide to… High Performance Materials', Chapter 1

03/17/2022 | I-Connect007 Editorial Team
Choosing the right material for your application can be a major challenge. These are “cost to performance” decisions that need to be made to select material that will meet the expected performance requirements and the desired cost targets. Selecting a material that meets cost targets but fails to perform in prototype development testing results in costly revision spins, cost increases and delays to market. Chapter 1 of this book helps readers understand what resin choices to make for optimal electrical performance.

A High-Voltage PCB Design Primer

01/12/2022 | Zachariah Peterson, NWES
Of all the different boards a designer can create, a high voltage PCB design can be complicated and requires strict attention to safety. If not laid out correctly these boards can be safety hazards or can fail to function on first power up, leaving a designer with wasted time and effort. In the best case, the board will function reliably for a long period of time thanks to correct layout practices. High-voltage PCB design can be as complex as any high-speed digital design. Boards for high-voltage systems can be space constrained and they carry important safety requirements. They also need to be highly reliable to ensure they will have a long life when run at high voltage and current.



Copyright © 2022 I-Connect007. All rights reserved.