Zuken Teams With Nano Dimension for 3D Printing Design Flow


Reading time ( words)

At PCB West, Zuken shared a booth with Nano Dimension. Zuken has been working with Nano Dimension for some time, and adding support for 3D printing and nanotechnology to its design tool platforms. I sat down with Zuken’s Humair Mandavia and Nano Dimension’s Simon Fried to learn more about this alliance, and to find out more about this odd-looking box being demonstrated in Zuken’s booth.

 

Andy Shaughnessy: I'm here at PCB West with Humair Mandavia and Simon Fried. Humair, tell us a little bit about what you're doing with Nano Dimension.

Humair Mandavia: Thank you, Andy. We had Nano Dimension as a guest at our booth at PCB West this year to showcase our partnership and share with the market what we're doing. We’re enabling users to go from the system-level 3D environment, using any kind of technology, into the printing stage and we highlighted how we're going to ease that journey and process. That's really what we're here to share.

Shaughnessy: Simon, tell us a little bit about this thing you have at the booth. What does it do?

Simon Fried: The thing that we have in the booth, hulking around the front center stage, is our 3D printer for circuit boards. It's an additive approach to constructing multilayer circuitry that’s backwards-compatible with the kind of design files that you'll find in the industry, your Gerbers and your Excellons. So far, it's familiar territory.

What it is doing is it's working in a very different way, and it's using different materials and a fully additive process to create that circuit. So, there are some novelties and some differences to a traditional multi-layer circuit board. That being said, we've been very careful to make sure the materials are, from an electrical perspective, as similar performance-wise to industry standards as possible.

So that's how one tackles planar circuitry, and then there's obviously another opportunity, which is how to open up that potential Pandora's Box of non-planar circuitry. That's something that I think the industry has to look forward to exploring.

Shaughnessy: Is this printed electronics?

Fried: Yes. About a week ago, I was reading my kids a book about a duck that could eat holes. If there was a hole, the duck would eat it, eating up the problems leaving perfection behind. That's a little bit like the additive process. It’s a bit magical, adding whatever is missing, and essentially you're getting rid of your traditional manufacturing processes. You're not plating, you're not drilling, and you’re not pressing. You're depositing materials in a very precise manner to create things, but you can also print a hole, by printing around an empty XY coordinate.

Shaughnessy: We were talking earlier about some of the challenges, because we're used to dealing with copper, and here you've got conductive silver and some of the other things that might affect signal integrity. Can you talk about that?

Mandavia: I can explain that. For a little bit more background, Zuken got into the whole additive space several years back for inkjet printers. We learned that from the CAD side that there's nothing unique, but when you start going into an inkjet printer, for example, that process of optimizing for ink droplets is just unique to your traditional fabrication.

We have a DFM product that specializes in only optimizing the spaces for bitmap resolutions so that you get the best quality output using inkjet. When we started working with Nano Dimension, through mutual customers we identified three key components that we wanted to focus on. The first is the business aspect, which is just lead time. A lot of the companies that we work with already understand the ROI of additive manufacturing, and then you also compound that with what's happening in defense and aerospace with companies driving towards a new methodology with digital tapestry and digital twin. Now, when we go into these concepts, there's already a model in place to justify having that kind of option inside their production flow. That brings in the value proposition for 3D printing for electronics.

The second component is a journey in itself. You brought up problems, but when we start looking at our partnership we just looked at how we're solving some of those problems. So yeah, different materials, different conductive inks, but they’re not an issue. By working together and working with other industry partners, we're already looking at how we can provide the ability to have downloadable design rule kits if they want to use it in a Zuken design flow. If they're not using our flow, no big deal. You could bring the design into our setup that we're working on and then bring in design rule-checks to make sure that you’re at least adhering to those requirements that are specific to any of the materials that are used for additive manufacturing over 3D printing for PCBs.

And then also, we're working with other industry partners to go through and validate the designs electrically. So whatever we're preparing for the market, all the design rules and checks are qualified. We want to take the mystery out, and just making that path from designing to printing much easier.

The third component is the freedom to be able to implement any board technology. We released CR-8000, as I mentioned, a native system-level 3D environment; it will support traditional design and allows you to scale-up to multi-domain, concurrent design, and that includes chips, packages, boards, and mechanical. CR-8000 is where real engineering and design come together.

When we started looking at 3D printing, we also needed to consider non-planar objects, for example MIDs. Nano Dimension is displaying some examples in our booth of non-planar electronics that we're working on now that show how we can allow that seamless interaction to design and print actual 3D electronics, and also reduce the hand-off to mechanical. It's still a little bit of a mechanical challenge, that's how people are juxtaposing it and producing it, so we want to make that experience better. So we're working on that, but then there are also the data models. We're working with IPC and IEC in Asia to define industry standards to help simplify that data transfer. We want to take advantage of our unique technology to make a better experience for the user, and we plan to work with Nano Dimension and our industry partners to advocate this technology to the market. There are many new applications ready to take advantage of this.

Share


Suggested Items

Excerpt: The Printed Circuit Designer’s Guide to…Flex and Rigid-Flex Fundamentals

06/25/2018 | Dave Lackey and Anaya Vardya, American Standard Circuits
The design process is arguably the most important part of the flex circuit procurement process. The decisions made in the design process will have a lasting impact, for better or worse, throughout the manufacturing cycle. In advance of providing important details about the actual construction of the flex circuit, it is of value to provide some sort of understanding of the expected use environment for the finished product.

Mark Thompson: What Designers Need to Know about Fab

06/08/2018 | Dan Beaulieu, D.B. Management Group
Mark Thompson wants to help PCB designers. He’s seen it all in CAM support at Prototron Circuits: the incomplete or inaccurate data packages, boards that are unnecessarily complex or over-constrained, and so much more. Mark just returned to writing his popular Design007 Magazine column, The Bare (Board) Truth, which addresses questions such as, “What happens to your design at CAM?” I asked Mark to explain why it’s so important for designers to communicate with their fabricators, and why they need to get out of the office and visit a board shop every now and then.

Experts Discussion: What Does 5G Mean to Materials and EDA Tools?

06/06/2018 | Andy Shaughnessy, Design007 Magazine
Whether we’re ready for it or not, 5G technology is coming. We decided to speak with John Hendricks, market segment manager for wireless infrastructure at Rogers Corporation, and Ben Jordan, director of product and persona marketing for Altium, about the challenges related to 5G and what this means for PCB designers and fabricators.



Copyright © 2018 I-Connect007. All rights reserved.