-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
HDI’s Beneficial Influence on High-Frequency Signal Integrity
October 17, 2017 | Happy Holden, I-Connect007Estimated reading time: 1 minute
Introducing the Benefits of Microvias
The increasingly widespread use of finepitch ball-grid array (BGA), chip scale packaging (CSP), and other evolving technology form-factors means that new fabrication techniques must be used to create printed circuit boards (PCBs). In addition, extremely fast clock speeds and high signal bandwidths challenge systems designers to find better ways to overcome the negative effects of noise, radio frequency interference (RFI) and electro-magnetic interference (EMI) have on their product’s performance. Finally, increasingly restrictive cost targets are compounding problems associated with today’s smaller, denser, lighter, and faster systems.
Staying competitive and delivering the products people want means seeking out and embracing the best available technologies and design methodologies. The use of PCBs incorporating microvia circuit interconnects is currently one of the most viable solutions on the market (Figure 1). Adopting microvia technology means that products can use the newest, smallest, and fastest devices, meet stringent RFI/ EMI requirements, and keep pace with downward-spiraling cost targets.
What are Microvia Technologies?
Microvias are vias of 6-mils (150 microns) diameter or less. Their most typical use today is in blind and buried vias used to create interconnections through one dielectric layer within a PCB. Microvias are commonly used in blind via constructions where the outer layers of a multilayer PCB are connected to the next adjacent signal layer. Used in all forms of electronic products, they effectively allow for the cost effective fabrication of high-density assemblies.
The IPC has selected high-density interconnection structures (HDIS) as the term to refer to these various microvia technologies. This definition is by no means universal. The Japanese refer to any via drilled by lasers in a thin dielectric as a microvia.
To read the full version of this article which appeared in the October 2017 issue of The PCB Magazine, click here.
Suggested Items
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
Real Time with... IPC APEX EXPO 2024: A Conversation with IPC's CEO: New Venue, Sustainability, and More
04/23/2024 | Real Time with...IPC APEX EXPOBarry Matties hosts Dr. John W. Mitchell, CEO of IPC, on the final day of IPC APEX EXPO 2024. They discuss the new venue in Anaheim and broach a range of topics, from traffic and booth experiences to workforce development, sustainability, and the CHIPS Act. And they offer advice for newcomers as IPC looks forward to an even better show experience next year.
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.