Bruce Mahler Discusses Ohmega’s Resistive Material Technology


Reading time ( words)

Bruce Mahler, vice president of Ohmega Technologies, sat down for an interview with me at DesignCon 2017. He discussed the company’s latest embedded resistive materials, as well as some of the drivers and challenges in that segment of the materials industry.

Andy Shaughnessy: Bruce, why don't you start off by giving us a brief background on Ohmega Technologies.

Bruce Mahler: Ohmega Technologies manufactures a thin-film resistive material, which is a nickel phosphorous alloy plated onto copper foil. That resistive foil, called OhmegaPly RCM, is laminated to a dielectric like regular copper foil and is then subtractively processed using standard PCB print and etch, to create resistive elements that are used either embedded within a multilayer printed circuit board or on the surface of a printed circuit board. We've been doing this for more than 40 years now, and we’re surprised with the variety of applications that use our technology. Every year it seems that there are new applications, new ways to use the resistive film. So, it's like a constant renewal of the technology in new opportunities, of new growth of the use of embedded resistors within printed circuit boards.

Shaughnessy: What are the primary markets that these boards wind up in?

Mahler: Good question. One of the primary markets is A&D (aerospace & defense) which we have been supplying our products to for decades. It’s mostly used in radar systems, control circuits, and in critical operating systems where absolute performance and reliability are essential. The resistive material cannot be affected by temperature extremes, high G-force, vibration, magnetic or cosmic radiation and those kinds of things.

The other big market is sensor technologies. We supply our product to the MEMS microphone manufacturers. If you have a cellphone, you probably have OhmegaPly within that cell phone. We're used in the MEMS microphone of cell phones as part of an RC filter to improve the sound fidelity of the microphones; we've been doing that for many years. There’s also a growing area of applications and use in sensor technologies: not just MEMS microphones but other MEMS devices and technologies.

The third area of use where we see growing opportunities are in heater designs. Heater elements are used for things like semi-active laser activation of smart munitions or embedded resistors as heater elements in a printed circuit board to maintain surface components at optimum temperatures for optimum operation, whether that's in deep-space applications or even down to earth in medical diagnostic type applications. OhmegaPly has also been used as an internal heater in burn-in boards to allow for IC burn-in without the need of a temperature chamber.

To read this entire article, which appeared in the April 2017 issue of The PCB Design Magazine, click here.

Share


Suggested Items

Zuken Teams With Nano Dimension for 3D Printing Design Flow

11/22/2017 | Andy Shaughnessy, PCB Design007
At PCB West, Zuken shared a booth with Nano Dimension. Zuken has been working with Nano Dimension for some time, and adding support for 3D printing and nanotechnology to its design tool platforms. I sat down with Zuken’s Humair Mandavia and Nano Dimension’s Simon Fried to learn more about this alliance, and to find out more about this odd-looking box being demonstrated in Zuken’s booth.

AltiumLive Summit—Munich, Germany, Part 2

11/13/2017 | Pete Starkey, I-Connect007
Pete Starkey continues with his review of the AltiumLive PCB Design Summit held recently in Munich, Germany. The second day commenced with a new product launch. “Working together is hard” it read on the screen. Statistics indicated that 33% of new products were late getting to market, of which 28% were late due to insufficient collaboration, and up to 50% of potential revenue could be lost through being late to market. Then the screen read “NEXUS makes it easy!”

AltiumLive Summit—Munich, Germany, Part 1

11/07/2017 | Pete Starkey, I-Connect007
Altium held a very successful AltiumLive PCB Design Summit in San Diego, California at the beginning of October for the benefit of their North American design community, and followed it three weeks later with a counterpart European event in Munich. And what an eye-opener it proved to be—literally hundreds of delegates, a superbly organised and managed programme, billed as a completely immersive two-day interactive design experience on a theme of learning, connecting and getting inspired.



Copyright © 2017 I-Connect007. All rights reserved.