-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Mentor Graphics Team Wins Harvey Rosten Award for Thermal Heatsink Optimization Methodology
March 21, 2017 | Mentor GraphicsEstimated reading time: 2 minutes
Mentor Graphics Corporation today announced that Dr. Robin Bornoff, Dr. John Parry and John Wilson, a team from Mentor Graphics Mechanical Analysis Division, received the Harvey Rosten Award for Excellence in thermal modeling and analysis of electronics. The team received the award for their paper, Subtractive Design: A Novel Approach to Heatsink Improvement, at the 33rd annual IEEE Thermal Measurement, Modeling and Management Symposium (SEMI-THERM) in San Jose, California.
The Mentor Graphics team created a unique methodology to sequentially remove underperforming portions of a heatsink to save weight and cost without compromising overall thermal performance. This method using Mentor Graphics FloTHERM technology provides a variety of automated optimization approaches to gain deeper insights into thermal characterizations to determine the best thermal design solution.
“We are extremely proud of our team for their commitment and dedication in discovering ways in which heatsinks may be optimized,” stated Roland Feldhinkel, general manager of Mentor Graphics Mechanical Analysis Division. “To be recognized by the selection committee comprised of highly esteemed thermal experts is a tremendous honor, and particularly personal since this award is named after the co-founder of Flomerics, which Mentor Graphics acquired in 2008.”
The Harvey Rosten Award For Excellence has been established by the family and friends of Harvey Rosten, who was responsible for the development of PHOENICS, the world’s first commercial general purpose computational fluid dynamics (CFD) software while working at CHAM, and co-founder of Flomerics (now a division of Mentor Graphics Corporation). The Award commemorates Rosten's achievements in the field of thermal analysis of electronics equipment, and the thermal modeling of electronics parts and packages. The award aims to encourage innovation and excellence in these fields.
Dr. Robin Bornoff is a market development manager in Mentor Graphics Mechanical Analysis Division. Robin was previously an application and support engineer, and a product marketing manager, specializing in the application of CFD to electronics cooling and the design of the built environment. He attained a mechanical engineering degree from Brunel University in 1992 followed by a PhD in 1995 for computational fluid dynamics (CFD) research.
John Wilson is currently the electronics product specialist for Mentor Graphics Mechanical Analysis Division. John previously managed the engineering design services team, where he gained extensive experience in IC package-level test and analysis correlation, heatsink optimization and compact model development. He joined Mentor Graphics is 1999 after receiving his BS and MS in mechanical engineering from the University of Colorado at Denver.
Dr. John Parry is the electronics industry manager for Mentor Graphics Mechanical Analysis Division, which he joined when it was founded as Flomerics in 1989. He attained a chemical Engineering Degree from Leeds University in 1982 and a PhD in 1988. His expertise includes compact modeling of fans, IC and LED packages, heatsinks, DoE and optimization methods, and thermal characterization, with over 75 published technical articles. John is a member of JC15 and past chair of SEMI-THERM.
To learn more about Mentor Graphics FloTHERM technology and to access articles and papers by these Harvey Rosten Award winners, click here.
About Mentor Graphics
Mentor Graphics Corporation is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues in the last fiscal year of approximately $1.28 billion. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. Visit www.mentor.com/.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.