-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Tech Talk: 225 Tech Talks—1995 to 2016
November 9, 2016 | Karl Dietz, Karl Dietz Consulting LLCEstimated reading time: 1 minute
In August of 1995, the first Tech Talk column issued in CircuiTree Magazine with the title “Process Latitude.” The tag line of “fine lines in high yield” served us well, as it was reasonably broad to encompass many processing and material issues. However, other issues equally important to PCB and substrate manufacture and performance deserved coverage and were addressed over the years.
In April 2011, the last Tech Talk article (No. 183) appeared in CircuiTree Magazine’s last edition. By then, CircuiTree founders Barry Matties and Ray Rasmussen had launched PCB007, and they were about to add several online publications, including The PCB Magazine. It was at the spring 2011 IPC APEX EXPO where I ran into Ray, who talked me into continuing the Tech Talk column in The PCB Magazine, as he persuaded several of the other usual suspects to contribute also. Without missing a beat, Tech Talk No. 184 then appeared in the May 2011 edition of The PCB Magazine and has been a fixture ever since.
Checking back on Tech Talk Nos. 100 and 200, which reflected on past and anticipated future changes in electronic packaging, I noted the production shift to Asia, followed by the relocation of the supplier base, and, more recently, the design of electronic devices. New mobile applications forced technology changes and shifted the economic viability of old and new companies.
To read this entire article, which appeared in the November 2016 issue of The PCB Magazine, click here.
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
ASMPT to Exhibit Smart Manufacturing at IPC APEX EXPO 2024
03/27/2024 | ASMPTWith its innovative, data-driven Intelligent Factory concept and a comprehensive hardware and software portfolio around SMT production, market and innovation leader ASMPT will be a major presence at the IPC APEX EXPO 2024, the industry’s main event in California.
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.
TRI Launches New Advanced Packaging 3D CT AXI Solution
03/26/2024 | TRITest Research, Inc. (TRI) proudly announces the launch of the SEMI 3D CT AXI solution, TR7600F3D SII Plus, marking a paradigm shift in precision and reliability for high-reliability electronics manufacturing, such as the Advanced Packaging Industry.
Blackfox Ready for IPC APEX EXPO 2024
03/26/2024 | Andy Shaughnessy, I-Connect007Blackfox Training Institute offers IPC-certified training for a myriad of PCB assembly techniques and standard certifications. With many technologists beginning to eye retirement, this training is at a premium. I recently spoke with Jamie Noland, director of training and education for Blackfox, about the company’s latest educational efforts, and his plans for the upcoming IPC APEX EXPO, where Blackfox will be exhibiting.