Flex Talk: Troubleshooting Flex Circuit Applications for Mil/Aero Projects
October 6, 2016 | Tara Dunn, OMNI PCBEstimated reading time: 1 minute
I imagine that everyone has been in this position at one time or another: Despite everyone’s best attempt at creating the perfect design, PCB fabrication and assembly, something goes wrong and the troubleshooting begins.
I had the opportunity to sit down with Ed Knutson, the president and founder of Dimation, to swap some of our best war stories. Ed specializes in quick-turn assembly and design. Our banter, to which I brought the fabrication piece of the puzzle, was primarily focused on flexible circuit applications for mil/aero projects. I am not sure if that is because of the more stringent requirements for those applications or because we both work regularly in that industry segment. At the end of our discussion, we concluded that most of our war stories could be traced back to a breakdown in communication and often simply not fully understanding how each piece of the design-fabrication-assembly puzzle fits together. Here are a few of our stories and lessons learned.
UL Materials
Aircraft applications typically require materials rated to UL94V-0. The assembly is complete and the burn test fails. What happened? The perfect storm. When the design files were created for fabrication and assembly, the UL requirements were noted in the assembly files only and called out by test requirements, not UL 94V-0. This was an ITAR application, so the PCB fab files were separated from the assembly files and forwarded to the flex manufacturer. Because there were no UL requirements listed on the fabrication notes, the supplier defaulted to their standard materials and the flex was not built with flame-retardant materials. That explains why the final assembly failed the burn test. Lesson Learned: Always clearly communicate UL requirements and include the requirement in both the PCB fabrication notes and the assembly notes.
To read this entire article, which appeared in the September 2016 issue of The PCB Magazine, click here.
Suggested Items
SMTA’s Conducts First UHDI Symposium
03/29/2024 | Marcy LaRont, PCB007 MagazineSMTA’s first UHDI Symposium in Peoria, Arizona, on Tuesday, March 26 featured a standout full-day technical program with 11 separate presentations on what will be required for our companies to move to ultra HDI manufacturing. The event was the brainchild of Tara Dunn, SMTA director of training and education. It included a compelling and collaborative presentation by David Haboud of Altium, John Johnson of American Standards Circuits, and Chrys Shea of Shea Engineering, who had spent the past several weeks creating and building an appropriate SMT test board vehicle for UHDI, something that was passed around for all conference goers to see and touch.
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.