Happy’s Essential Skills: Failure Modes and Effects Analysis (FMEA)
April 6, 2016 | Happy HoldenEstimated reading time: 12 minutes
Figure 2: FMEA flow chart.
Steps in Performing FMEA
- Discuss and define system functional requirements (scope), including all modes of operation (list in order of decreasing importance). Is it for concept, system, design, process, product or service and customer needs?
- Develop a functional block diagram and a reliability block diagram (Figure 2) for each subassembly being analyzed.
- Define parameters and functions of each functional block required for successful operation of the system.
- Using the FMEA forms to document the further steps, identify potential failure modes for each of the functional blocks.
- Analyze system or subassembly functions affected by factors such as those in the list of FMEA considerations.
- Identify all possible causes for each failure mode of the functional block being analyzed. The causes must be detailed to the component level wherever possible. These are potential failure modes. If necessary, go back and rewrite the function with more detail to be sure the failure modes show a loss of that function.
- Identify all possible ways the failure modes could affect the functions of the higher level assemblies.
- Assign the frequency, criticality, and detection values for each failure mode. (Tables 1– 3)
- Obtain the RPN by multiplying the three values assigned in step 8. This priority number will allow us to focus on the most important failure modes first.
- Determine all the possible root causes and corrective actions for each failure mode, and update the design status as it progresses.
- Summarize the failure modes and corrective actions in order of decreasing RPN.
- Focus on eliminating at least the 50% of the failure modes with the highest RPN.
An example of a FMEA analysis is shown in Figure 3.
Page 3 of 5
Suggested Items
Real Time with… IPC APEX EXPO 2024: Magnalytix's Services and Trends in the Electronics Industry
05/10/2024 | Real Time with...IPC APEX EXPOMike Bixenman, president of Magnalytix, explains Magnalytix's services, including third-party validation, test boards, electrical testing, and comprehensive reports. He also discusses emerging trends such as power electronics and reliability. Standards and design improvements also form part of this conversation.
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
EMA Webinar: Next Generation MCAD/ECAD for SOLIDWORKS
05/09/2024 | EMA Design AutomationLearn how the MCAD and ECAD experts at Hawk Ridge and EMA can help you solve your MCAD/ECAD integration challenges with this unique collaboration environment.
Sondrel Awarded New Video Processor ASIC Design and Supply Contract
05/09/2024 | SondrelSondrel, a leading provider of ultra-complex custom chips for leading global technology brands, is pleased to announce that it has won a major ASIC design and supply contract for a next generation, video processing chip.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in