Happy’s Essential Skills: The Need for Total Quality Control (Six Sigma and Statistical Tools): Part 1
January 13, 2016 | Happy HoldenEstimated reading time: 11 minutes
The key principles[2] of TQC are:
1. Management Commitment
Top management has to drive any system as large or as complex as TQC. Until management makes that commitment, a bottoms-up approach of sending engineers or workers to SPC or quality classes will not take root. My experience with this started when our group VP introduced TQC to his staff. He gave each of them a personal project and then had each of them train their staff after which they gave out individual projects. This 4 Episodes of TQC was labeled LUTI for Learn, Use, Teach, Individualize, and so forth, down through the structure until it got to the individual supervisor and worker.
Figure 2: TQC Improvement Circle consisting of plan-do-check-act.
2. Process Improvement
The TQC Improvement Circle or PDCA steps are used in a continuous manner to assess the current situation, propose and implement solutions, test effectiveness of the solution, and standardize the process on those solutions that are found effective (Figure 2). Data is used to prioritize the improvements on which to work.
• Plan (drive, direct)
• Do (deploy, support, participate)
• Check (review)
• Act (recognize, communicate, revise)
3. Employee Empowerment
• Training
• Suggestion scheme
• Measurement and recognition
• Excellence teams
4. Fact-Based Decision Making
• SPC (statistical process control)
• DOE, FMEA
• The 6 statistical tools
• TOPS (Ford 8D—team-oriented problem solving)
Continuous Improvement
• Systematic measurement and focus on CONQ
• Excellence teams
• Cross-functional process management
• Attain, maintain, improve standards
Customer Focus
• Supplier partnership
• Service relationship with internal customers
• Never compromise quality
• Customer-driven standards
The Concept of Continuous Improvement by TQC
TQC is mainly concerned with continuous improvement in all work, from high-level strategic planning and decision-making, to detailed execution of work on the shop floor. It stems from the belief that mistakes can be avoided and defects can be prevented. It leads to continuously improving results, in all aspects of work, because of continuously improving capabilities, people, processes, technology and machine capabilities.
Continuous improvement must deal not only with improving results, but more importantly with improving capabilities to produce better results in the future. The five major areas of focus for capability improvement are demand generation, supply generation, technology, operations and people capability.
Figure 3: TQC central principles and what it is NOT.
A central principle of TQC (voiced by Dr. Deming) is that people may make mistakes, but most of them are caused, or at least permitted, by faulty systems and processes. This means that the root cause of such mistakes can be identified and eliminated, and repetition can be prevented by changing the process[3]. There are three major mechanisms of prevention:
1. Preventing mistakes (defects) from occurring (mistake-proofing or poka-yoke).
2. Where mistakes cannot be absolutely prevented, detecting them early to prevent them from being passed down the value-added chain (inspection at source or by the next operation).
3. Where mistakes recur, stopping production until the process can be corrected, to prevent the production of more defects (stop in time).Page 2 of 4
Suggested Items
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
KYZEN to Promote Pair of Stencil Cleaning Chemistries at SMTA Ciudad Jaurez Expo & Tech Forum
04/25/2024 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Ciudad Juarez Expo & Tech Forum, scheduled to take place Thursday, May 9, 2024 at the Injectronic Convention Center in Ciudad Jaurez, Chihuahua, Mexico. During the event the KYZEN Clean Team will focus on understencil cleaning products KYZEN E5631J and CYBERSOLV C8882.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.