Navigating the Global Materials Supply Chain: A Roundtable Discussion
December 3, 2015 | Andy Shaughnessy, I-Connect007Estimated reading time: 15 minutes
Goodwin: One of the things we've done to properly address that is we very recently set up our own OEM team. We call it an OEM marketing team, but it's about a two-way information flow, not just us marketing our products to the OEM. We really want to know their roadmaps and where they're going. Also you've got to be very careful because a lot of the things you see happening in high-speed digital materials now is that everybody wants a custom laminate product. That puts an immense pressure on the supply chain because small quantities of very special products are very, very difficult to deliver. One of the messages we're sending out there is to try to get people to root their technologies around a product base so we stand a chance to deliver that within the time scales and be as reactive as the OEMs want us to be. I guess you guys are really stuck in the middle of this, aren't you? If we haven't got the products available you can't support the OEMs.
Keuthen: It is like that, definitely. The only chance to deal with this is obviously having a wide variety of products on board to be able to supply our various customers’ needs. That's one thing. On the other hand, we've got products that are not lasting for that long. When you think of the pre-pregs, it’s a three-month time period that we've got, so we are not really able to forecast that long to stock it very long.
Otherwise we have to retest it and that's something in the supply chain that came to my knowledge as well. That we've got a lot of problems getting these materials in time in our house and then have them available for at least three months. After that the expiration date of these materials is also done. That makes our life even more difficult.
Willis: A lot of customers just don't fully understand that these materials do have a shelf life.
Keuthen: That is true.
Willis: They come to you and the designers probably don't comprehend that. I think that one of the challenges again is the education. If you go back and understand how a designer works on a specification that he wants to achieve, with the greatest respect, so many designers never visit a PCB shop. They don't understand how it all is made.
I know that's basic stuff, but having that understanding first of all and then building on that is so important. Then when you make a point, he can understand what you're saying. He's not saying you're specifying something because there's more profit margin in it. You understand technology first. You help, you talk, communicate, etc. I think that's one of the nice things that a lot of major PCB manufacturers have done is get people that are experts in assembly and are experts in design and provide that expertise to the customer. Then you get a better build, a better understanding back from them so consequently you can do it quicker and you can do it at a more reasonable price because you've done your development up front.
Goodwin: One of the things that you bring up that's really interesting is, and Jack mentioned it earlier, it is in the competitive nature of our business to almost blanket the demands that come out of OEMs. One of the things that springs to my mind immediately that links in with what you were saying is about pre-preg retesting. We get OEMs that say you cannot supply a retested product. Now we make pre-preg to a specification. We measure a set of characteristics on that pre-preg, so it either passes or it fails. So with blanket bends on retesting, all they do is add to the complexity in the supply chain, delays in the supply chain, and added costs in the supply chain.
Actually I think mostly they're put in place by people that really don't understand that we're a manufacturer of a product. We make it to a specification. We test it to a specification. When we retest it, we retest it to that original specification. Either it passes or it fails. It's delivered with a retest certificate and a CMC and we're standing behind the retest we've done.
Page 3 of 6
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/17/2024 | Andy Shaughnessy, Design007 MagazineThis week, trade shows are at the top of our feed, with our coverage of the Del Mar Electronics and Manufacturing Show and IPC APEX EXPO. These two longtime events are almost polar opposites in size and scope, but Del Mar seems to be expanding from its roots as a “neighborhood gathering” with its move into the Del Mar Fairgrounds. The Del Mar show always has a good “buzz factor,” which is something you can’t buy.
IPC APEX EXPO: Some Thoughts About Growth
05/16/2024 | Dan Feinberg, I-Connect007After two and a half days of wandering the aisles at IPC APEX EXPO 2024, for the first time, I almost felt like I was exploring CES. There were so many booths and exhibits that I could describe, but I’d like to focus on the growth and huge value of this event, which has expanded well beyond just the growing and impressive exhibit show floor.
IPC Raymond E. Pritchard Hall of Fame Award: Pierre-Jean Albrieux
05/10/2024 | Marcy LaRont, PCB007 MagazineCongratulations to Pierre-Jean Albrieux, who received the 2024 IPC Raymond E. Pritchard Hall of Fame Award. The award is given to individuals in recognition of the highest level of achievement, extraordinary contributions, and distinguished service to IPC and toward the advancement of the industry, including helping to create a spirit of mutual esteem, respect, and recognition among members consistent with the goals and mission of IPC.
IPC Focuses on Education and Onboarding
05/09/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with Carlos Plaza, senior director of education for IPC, about expanding educational efforts in the PCB design, fabrication, and assembly segments. As Carlos explains, PCB design is a hot topic, but onboarding may be the hottest one of all.
Real Time with… IPC APEX EXPO 2024: Industry Growth, Challenges, and Technological Advancements
05/09/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Shawn DuBravac, IPC chief economist, dive into key industry topics such as growth, challenges, and technological advancements. They discuss shifts in the global competitive landscape, downstream demand, customization, and how AI is enhancing human skills. The industry outlook appears promising for both the short and long term.