Innovating in the Technology of Stretchable PCBs
May 2, 2017 | Pete Starkey, I-Connect007Estimated reading time: 9 minutes
Since coming to the end of that project, we are in the early stages of the funding process for a second Eurostars project with an international consortium based in the Netherlands, and also some UK companies. That project is to develop tactical vests for the police force, for monitoring of vital signals and for tracking.
Starkey: I see some examples of what would appear to be more conventional flexible circuit designs, but they don’t look or feel like conventional flex substrates. They’re quite rubbery and extremely flexible—completely different from flex built from Kapton. Can you tell me something about them?
Makwana: Yes, they’re based on a PEEK (polyether-ether-ketone) fabric which we coat with a resin and foil to produce a thin reinforced flexible copper-clad laminate, but which contains no glass. And again, the coverlay is polyurethane. These are complementary to stretchable circuits in applications like military tactical vests, where they have been used as connectors. They have been extensively tested and have out-performed alternative materials. There has been a lot of interest and we have made samples for evaluation by companies as far away as New Zealand. The applications have moved beyond the military, into wearables for police and emergency services. From the feedback we have had, they are proving to be very durable and survive many cycles of washing, for example. And we are anticipating a rapid ramp-up in demand—into the thousands. That’s going to give us a headache, but a good headache!
Starkey: What sort of partnering opportunities are there, to cope with that increasing demand?
Makwana: We have explored a couple of partnering options. One of them was a laminate supplier. The trickiest part is putting the resin on the fabric, and we thought they would be able to automate that operation, but it didn’t work well their end—they were not able to do it! In the meantime, we are producing the material in-house, but not in roll form – only as panels.
Hill: Outside of the stretchable projects we have discussed, we have been working with universities—three of them in the United States. And one of the companies we worked with in the original STELLA project still sends us a range of designs for different applications. It seems from the feedback we get that there is significant interest in medical applications, and from the sportswear industry.
Starkey: Looking back to productronica 2011, the first of your examples I saw was an insole for a sports shoe.
Makwana: Yes, now that has developed further we manufacture insoles for a company in California, which our sister company assembles. We currently have units in production in the factory here. Another example is this test circuit we have made on 50-micron polyurethane for one of the American universities that Mike mentioned. It has tracks as fine as 50 microns—you can borrow my glass to take a look! The copper foil thickness is 12 microns and the finish is standard electroless nickel/immersion gold.
Starkey: That’s a very impressive example, although I wouldn’t like the job of handling material that flimsy through process machinery!
Changing the subject, do any standards exist yet for stretchable circuits, and is anyone working on standards?
Hill: We’re not aware of any industry standards. Everything we’ve done so far has been to specifications agreed within the project, or with individual customers. We inspect to basic IPC acceptability standards, and release against whatever performance requirement has been agreed to with the customer before we commit to accepting the purchase order.
Starkey: How do you manage design—where a lot of design features are unique and exclusive? Do you produce your own designs, or do you licence your design features to third-party designers?
Hill: We have basic capability guidelines, and there is close cooperation between the customer’s engineers and our own engineering team to agree design-for-manufacture rules for a specific project. There is one contract designer we know who has developed his own software, and we sometimes direct enquiries to him. But as far as the major EDA vendors are concerned, this area is so specialised that there is not yet enough commercial potential to be of real interest to them.
Starkey: But if we look at some of the projections for wearable technology in general, the growth forecasts are spectacular: 10% annually to 2018, then accelerating to 23% by 2023. The analysts reckon that the overall market for electronic products designed to be worn on the person will have grown from $30 billion in 2016 to more than $150 billion by 2026. And I am sure that stretchables will at least follow this trend.
Vin, Mike, thank you for sharing your knowledge and experience—a most enlightening half-hour. I realise that stretchables represents only part of your PCB manufacturing capability, but you seem to have established an exclusive niche technology. I wish you every success for the future.
Page 2 of 2Suggested Items
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.